D & L Thomas Equipment Corporation

Your one stop for drilling, blasting, demolition and waterwell equipment and supplies

EXPLOSIVES MAGAZINES

THOMAS Truck Magazines

D&L Thomas Truck Magazines are built to meet IME Specifications 22 and feature seperate compartments for blasting caps and dynamite, an integral locking mechanism, 2" hardwood lining and brackets for bolting down into a truck bed. Fits into any standard size truck body in front of wheel wells. We can also build to suit your needs.

TM112 Outside Dimensions LxWxH - 60" x 30" x 24" Lining Thickness - 2" Approximate Case Capacity - 11 case

TM42 Outside Dimensions LxWxH - 42" x 24" x 24" Lining Thickness - 2" Approximate Case Capacity - 4 case

TREAD DAY BOXES

These containers meet ATF Regulations for both Type II Indoor Storage Magazine and Type III Day Box applications. They are constructed of 12-gauge steel with two 1/4 inch steel lock hoods and are lined with 1/2 inch plywood secured with non-sparking rivets.
The lightweight construction of these units enables easy transfer from storage inside a building overnight to a truck bed for daytime use, making them ideal for small jobs and blasting cap daytime storage on the job.

46M - 24x17x15 inches

86M - 48x17x15 inches

---

"TREAD" MAGAZINES

Tread Corporation, a leader in the manufacture of explosive storage facilities, has supplied fine quality permanent and portable storage magazines to the blasting industry since 1957

All Tread Type 2 Portable Magazines are built to meet rigid government specifications as set forth in the Bureau of Alcohol, Tobacco and Firearms regulations in Title 27 Code of Federal Regulations, Paragraphs 55.208, "Construction of Type 2 Magazines".

These magazines are constructed from 1/4" hot rolled steel plate which is manufactured to our specification by some of America's leading steel producers. Wood linings are milled to full thickness from the finest Appalachian hardwoods, purchased in truck load quantities. We manufacture our own ventilator covers, hasp and staples, padlock covers, hinges, and skids.

Hinge pins are hardened and hinge barrels and lock staples are made from alloy steel for extra protection. The nose of the skids are beveled at approximately 45 degrees for easier moving. There are openings on the ends of the skids, as well as lift rings on the top of the magazine, for the attachment of chains or cables for moving. The doors are sheared from the side of the magazine to provide a close fit and each door is provided with drip protection from the weather. The first inner layer of hardwood is bolted securely in place with successive layers attached by air staples. All Type 2 Portables have stand-off strips on the inside layer of hardwood at the screened ventilators, thus preventing the packing of the explosives from hindering ventilation.

Specifications

Outside Dimensions LxWxH	Lining Thickness	Approximate Case Capacity	Part Number
42" x 42" x 33"	3" 4"	12 12	TM123 TM124
42" x 42" x 42"	3" 4"	24 24	TM243 TM244
72" x 48" x 48"	3" 4"	40 40	TM403 TM404
66" x 60" x 60"	3" 4"	90 90	TM903 TM904
66" x 66" x 84"	3" 4"	108 108	TM1083 TM1084
66" x 84" x 84"	3" 4"	144 144	TM1443 TM1444
96" x 84" x 84"	3" 4"	200 200	TM2003 TM2004
132" x 84" x 84"	3" 4"	320 320	TM3203 TM3204

TM15	"Master" Lock, Size 15. Meets ATF specifications. 7/16" hardened shackle. Available keyed alike. Protect your investment.

We Accept:

Take a moment to review our Credit Card policy before ordering

For a complete Indexed Listing of our site Click Here Index To search our website, click here. Try our website search page!

| Home | Air | Blasting | Drilling | Waterwell | Vibration | Catalog | About Us |

| Contact Us |

Contact the D&L Thomas Webmaster with questions or comments about this site.

Copyright(c) 1997-2003 D&L Thomas Equipment Corporation

All Rights Reserved.