The Scorpion® is the first Sullivan® self-contained air track drill featuring flexibility and other options you will not find anywhere else. Based on the proven efficiency, economy, and low maintenance performance of Sullivan's pneumatic RAM drills. These drills meet or exceed the hydraulic equivalents but offer you a lower purchasing price, operating cost, and greater reliability.
Designed so a single operator can unload, set up, and operate the versatile Scorpion®. As a single operator can do all of this, set up time, down time, and total costs are also reduced at the same time! To increase flexibility the compressor can be removed from the unit and it can be run off of a portable air compressor if neccessary.
Nothing else even comes close!
| VCR-360 Drill Specifications | |
| Bore Diameter: | 5 ¼" ( 134 mm ) |
| Stroke: | 3 5/8" ( 92 mm ) |
| Striking Bar: | Threaded For Optional Steel |
| Drill Steel: | 1 ½" OD Std. 1 ¾" OD Optional |
| Rotation Type: | Independent |
| Air Tube OD / ID: | 5/8" / ½" |
| Hose Size: | 2" Drill, 1" Blow, ¾" Rotation |
| Hole Size Range: | 2 ½" to 4" Bit Diameter ( 64 to 102 mm ) |
| Air Pressure: | 100 PSI ( 7 KG / CM³ ) |
| Air Requirements: | 600 CFM ( 16.8 M ³ / Min ) Drill & Blow ( Up to 2,500 Feet Above Sea Level ) |
| Drill Weight: | 483 Lbs. ( 219 kg ) |
| Blows Per Minute: | 2250 BPM |
| VCR-361 Drill Specifications | |
| Bore Diameter: | 6 ½" ( 166 mm ) |
| Stroke: | 3 ¾" ( 95 mm ) |
| Striking Bar: | Threaded For Optional Steel |
| Drill Steel: | 1 ¾" OD |
| Rotation Type: | Independent |
| Air Tube OD / ID: | ¾" / 5/8" |
| Hose Size: | 2" Drill, 1" Blow, ¾" Rotation |
| Hole Size Range: | 3" to 4" Bit Diameter ( 76 to 102 mm ) |
| Air Pressure: | 100 PSI ( 7 KG / CM³ ) |
| Air Requirements: | 850 CFM ( 24 M ³ / Min ) Drill & Blow ( Up to 2,500 Feet Above Sea Level ) |
| Drill Weight: | 510 Lbs. ( 231 kg ) |
| Blows Per Minute: | 2050 BPM |
